Wrench Holder Uxcell Round Die & Wrench Set - Fix Threads Like A Pro! (#8-32 UNC, Fits 11mm-20mm Dies) Die Handle

Round Threading Dies The round dies can process, correct or clean external threads. Features: The die holder provides good wear resistance for long service life. The die surface is lubricated with grease to prevent rust. Alloy Tool Steel Dies High hardness , Wear resistance , High hardening capacity , Tempering resistance Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc., ., NOT suitable for tile, concrete, walls, stone, etc. Die Stock Handle Wrench The die stock fits round dies. Sourcing Map 8pcs Round Die Stock Handle Wrench Set, M3 M4 M5 M6 M8 M10 M Wide Applications For rethreading existing threads in hard materials like metal, or making new threads in softer material such as plastic. uxcell Die Stock Handle Wrench Set, 6-32 UNC Round Die and 20mm Die Holder (Fits 1/8"-5/32" (UNC/UNF) / Metric M3-M4 / 20mm OD Dies) for Bolt Thread Repair 8-32 UNC Die Wrench Holder Uxcell Round Die & Wrench Set - Fix Threads Like A Pro! (#8-32 UNC, Fits 11mm-20mm Dies) Die Handle 4-40 Tap Die & Wrench Set: Die Wrench: 20mm x 5mm die stock fits 11mm-20mm outside diameter die / M3-M4 thread die, with 4 adjustable screws Round Die: #8-32 UNC threading die with 20mm outside diameter. When tapping, add suitable lubricating oil to the cutting edge, and repeat the operation 3-4 times until the thread length is obtained. Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. Great for maintenance and repair work on pipes, boards and machinery. Tips for Round Dies The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in. Conical locking hole, strong locking and not loose. The die stock can securely hold round dies and is easy to operate. Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.